Page 5 Version 2
Step 14
– You can adjust the distance that the clay is thrown by extending the
spring. This is achieved by winding tension on or off the main spring using
a ¾”
wrench
or the optional ¾” extended socked which can be attached to an impact
drive. This should be done with the machine in the disarmed/safe condition for
small adjustments. After adjusting the main spring for the correct throwing
distance, the nuts on the spring stud must be tightened securely against each
other.
Step 15
– The pull cord or optional radio release can now be connected to the
machine. Pull cord will connect through the yellow- ended cord.
Step 16
– The machine can now ready for use by pressing the
ARM/OFF/DISARM toggle switch, down to the
“ARM” position.
