800-797-4632 . mecoutdoors.com
9
MEC AUTO-MATE ASSEMBLY MANUAL
Step 9:
Move the drop tube holder assembly back into
position.
Step 10:
Depress linkage assembly to the bottom of
loading stroke. While holding it down, tighten
middle bolt using (2) 7/16” wrenches to keep
turret assembly in the down position.
Step 11:
From the front of the reloader align the pivot
block and charge bar assembly and attach with
the pivot block bolt.
12
STEP 7
RE-ATTACH THE INDEXING
ACTUATION BRACKET.
STEP 8
ADD THE REAR LINK BOLT NUT AND
TIGHTEN.
IMPORTANT! ONLY TIGHTEN THE
REAR LINKAGE BOLT NUT ENOUGH
TO BRING ALL OF THE PARTS
TOGETHER.
STEP 9
MOVE THE DROP TUBE HOLDER
ASSEMBLY BACK INTO POSITION.
13
STEP 10
DEPRESS HANDLE ASSEMBLY TO
THE BOTTOM OF LOADING STROKE.
TIGHTEN MIDDLE BOLT TO KEEP
TURRET ASSEMBLY IN THE DOWN
POSITION.
STEP 11
ALIGN THE PIVOT BLOCK AND
CHARGE BAR ASSEMBLY AND
ATTACH WITH THE PIVOT BLOCK
BOLT.
STEP 12
WITH A ½” END WRENCH TIGHTEN
PIVOT BLOCK BOLT SECURELY.
13
STEP 10
DEPRESS HANDLE ASSEMBLY TO
THE BOTTOM OF LOADING STROKE.
TIGHTEN MIDDLE BOLT TO KEEP
TURRET ASSEMBLY IN THE DOWN
POSITION.
STEP 11
ALIGN THE PIVOT BLOCK AND
CHARGE BAR ASSEMBLY AND
ATTACH WITH THE PIVOT BLOCK
BOLT.
STEP 12
WITH A ½” END WRENCH TIGHTEN
PIVOT BLOCK BOLT SECURELY.
