Page 4
2
94533r1 - December 2017
45
-
A
J Diesel
Transport and Lifting Instructions
Driving or Winching onto or off of a Transport Vehicle
Before loading the machine, orient the turntable so that the platform is over the non-
steering wheels so that the steering wheels are at the front.
ONLY properly trained and qualified operators shall load and unload this machine.
Read and understand all safety, control, and operating information found on the machine and in this
manual before operating the machine.
Whether winching or driving the machine on to a truck or trailer, always check the area for dangerous
situations before moving the machine.
If driving the machine, always use a second person acting as a spotter to make sure the person loading
the machine avoids dangerous situations.
Driving
• Turn the Base Key Switch to PLATFORM. Check that the Emergency Stop Switch is
reset by turning it clockwise.
• Enter the platform and reset the Platform Emergency Stop Switch.
• Test platform control functions.
• Raise the jib slightly for platform ground clearance.
• Carefully drive the machine off or on to the transport vehicle.
• Make sure you can see the second person giving guidance.
Note:
The brakes are automatically released for driving and will automatically
apply when the control lever is returned to neutral which causes the
machine to stop.
Winching
• Chock the wheels, then disengage brakes (see
Disengage Brakes before Towing or
Winching
on page 41).
• Carefully operate the winch to lower the machine down the ramp or pull the machine
up the ramp.
• Chock the wheels and engage the brakes before disengaging the winch.
Winch
ART_4741
