45-AJ Diesel
Safety
This product contains chemicals known to the State of California to cause cancer and/or birth
defects or other reproductive harm.
Safety
DO NOT operate this machine until you have read and understood this manual, have performed the Workplace Inspection,
Pre-Start Inspection and Routine Maintenance, and have completed all the test operations detailed in the Operating
Instructions section.
Failure to read, understand and follow all safety rules, warnings, and instructions could result in serious injury or death. For your
safety and the safety of those around you, you must operate your machine as instructed in this manual.
MEC designs aerial work platforms to safely and reliably position personnel, along with their necessary tools and materials, at
overhead work locations. The owner/user/operator of the machine should not accept responsibility for the operation of the machine
unless properly trained.
ANSI and other applicable standards identify requirements of all parties who may be involved with boom-supported elevating work
platforms. The ANSI/SIA A92.5-2006 Manual of Responsibilities is considered a part of this machine and can be found in the manual
compartment, located at the platform control station. To ensure safe use of machine, inspections and training specified in ANSI/SIA
A92.5-2006 must be performed at designated intervals as prescribed.
General
This section prescribes the proper and safe practices for major areas of machine usage. In order
to promote proper usage of the machine, it is mandatory that a daily routine be established based
on instructions given in this section. A maintenance program must also be established by a
qualified person and must be followed to ensure that the machine is safe to operate.
The owner/user/operator of the machine should not accept operating responsibility until this
manual has been read and understood, and operation of the machine, under the supervision of an experienced and qualified
person, has been completed. If there is a question on application and/or
operation, MEC Aerial Platform Sales Corp. should be consulted.
Most accidents that involve product operation, maintenance and repair are caused by failure to
observe basic safety rules or precautions. An accident can often be avoided by recognizing
potentially hazardous situations before an accident occurs. A person must be alerted to potential
hazards. This person should also have the necessary training, skills, and tools to perform these
functions properly.
Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in
injury or death. Do not operate product, until you have read and understand the operation information.
California Proposition 65 Warning
45-AJ Diesel
Introduction
45
Introduction
60-J Diesel
Safety
45-AJ Diesel
Safety
Page 2
94533r1
-
December
2017
