manualshive.com logo in svg

Measurement Computing Data Translation DT3010 Series, Руководство пользователя, Страница: 19 / 232

Поделиться
Скачать
Measurement Computing Data Translation DT3010 Series Скачать руководство пользователя страница 19

Chapter 1

18

Supported Software 

The following software is available for use with the DT3010 Series boards and on the Data 
Acquisition OMNI CD:

•

DT3010 Series Device Driver 

– The device driver is installed automatically when you

install the software from the Data Acquisition OMNI CD. You need the device driver to
use the DT3010 Series board with any of the supported software packages or utilities

•

The Quick DataAcq application 

– This application provides a quick way to get a DT3010

Series board up and running. Using the Quick DataAcq application, you can verify the
features of the board, display data on the screen, and save data to disk.

•

The quickDAQ application –

 An evaluation version of this .NET application is included

on the Data Acquisition OMNI CD. quickDAQ lets you acquire analog data from all
devices supported by DT-Open Layers for .NET software at high speed, plot it during
acquisition, analyze it, and/or save it to disk for later analysis.

•

DT3010 and DT3016 Calibration Utilities

 – The DT3010 Calibration Utility allows you to

calibrate the analog input and analog output subsystems of the DT3010, DT3010-268,
DT3010/32, and DT3010/32-268 boards. The DT3016 Calibration Utility allows you to
calibrate the analog input and analog output subsystems of the DT3016 boards. Refer to

Chapter 8

 starting on 

page 159

 for more information on these utilities.

•

Measure Foundry

 

–

 

An evaluation version of this software is included on the Data

Acquisition OMNI CD. Measure Foundry is drag-and-drop test and measurement
application builder designed to give you top performance with ease-of-use development.
Order the full development version of this software package to develop your own
application using real hardware.

•

DT-Open Layers for .NET Class Library

 – 

Use this class library if you want to use Visual

C# or Visual Basic for .NET to develop your own application software for a DT3010 Series
board using Visual Studio 2003 or Visual Studio 2005; the class library complies with the
DT-Open Layers standard.

•

DataAcq SDK

 – 

Use the Data Acq SDK if you want to use Visual Studio 6.0 and Microsoft

C or C++ to develop your own application software for a DT3010 Series board using
Windows XP, Windows Vista, or Windows 7; the DataAcq SDK complies with the
DT-Open Layers standard.

•

DTx-EZ

 

–

 

DTx-EZ provides ActiveX controls, which allow you to access the capabilities of

the DT3010 Series boards using Microsoft Visual Basic or Visual C++; DTx-EZ complies
with the DT-Open Layers standard.

•

DAQ Adaptor for MATLAB

 – Data Translation’s DAQ Adaptor provides an interface

between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data
Translation’s DT-Open Layers architecture.

•

LV-Link

 

– An evaluation version of this software is included on the Data Acquisition

OMNI CD. Use LV-Link if you want to use the LabVIEW graphical programming
language to access the capabilities of the DT3010 Series boards.

Refer to the Data Translation web site (www.

mccdaq

.com) for more information on the 

appropriate software package for your application.

Содержание Data Translation DT3010 Series









































































































































































































































Отзывы:

Нет отзывов