Measurement Computing Data Translation DT3010 Series, Руководство пользователя, Страница: 109 / 232

Chapter 6
108
Through software, specify the range as 0 to 10 V for unipolar signals or
−
10 V to +10 V for
bipolar signals. Note that the range applies to the entire analog input subsystem, not to a
specific channel.
DT3010 Series boards also provide gains 1, 2, 4, and 8, which are programmable per channel.
Table 10 lists the effective ranges supported by DT3010 Series boards using these gains.
For each channel, choose the gain that has the smallest effective range that includes the signal
you want to measure. For example, if the range of your analog input signal is ±1.5 V, specify a
range of
−
10 V to +10 V for the board and use a gain of 4 for the channel; the effective input
range for this channel is then ±2.5 V, which provides the best sampling accuracy for that
channel.
The simplest way to specify gain for a single channel is to specify the gain for a single-value
analog input operation using software; refer to
page 110 for more information on single-value
operations.
If you are using an analog input channel list, you can use software to specify the gain for each
analog input channel entry in the analog input channel list.
Note: For analog input channel 32 (the 16 digital I/O channels) in the channel list, specify a
gain of 1.
A/D Sample Clock Sources
DT3010 Series boards provide two clock sources for pacing analog input operations in
continuous mode:
• An internal A/D sample clock that uses the 24-bit A/D Counter on the board
• An external A/D sample clock that you can connect to the screw terminal panel
The A/D sample clock paces the acquisition of each channel in the channel list; this clock is
also called the A/D pacer clock.
Table 10: Gains and Effective Ranges
Gain
Unipolar Analog
Input Range
Bipolar Analog
Input Range
1 0 to 10 V ±10 V
2 0 to 5 V ±5 V
4 0 to 2.5 V ±2.5 V
8 0 to 1.25 V ±1.25 V