STEP 1:
STEP 2:
6. Assembly
6.1
Assembly Procedures
◎
For first time assembly, please remove the Front-End from packaging and proceed to STEP 2.
◎
If the NMP unit has been configured and assembled previously, please turn off the unit and remove all input/ output connections.
◎
Remove 2 screws each from left and right sides. For reconfiguration, please remove screws from top cover (NMP650: 4 screws;
NMP1K2: 6 screws). Before lifting top cover, make sure all screws have been removed.
Figure 6-1. First time assembly
Figure 6-2. Reconfiguration - assembled previously
Remove: Lift output module slightly.
Install: Insert each module in a straight and leveled manner.
1
1
1
1
2
2
2
2
All 6 pins must be inserted into the correct sockets.
Grab the circled location and lift module
◎
The power supply unit may remain hot after power off, please leave the unit to cool for at least 5 minutes before assembly.
STEP 3:
◎
After removing the top cover, output modules may be installed or removed. Please refer to diagrams below for installation and
removal instructions. For first time assembly, it is recommended to install in order from right to left, starting with slot 4 (NMP650) or
slot 6 (NMP1K2). When installing a module, make sure all 6 pins of the connectors are inserted into the correct sockets. For modules
that are installed in the left most and right most slots, ensure the insulation Mylar films are positioned correctly. For empty slot(s),
blank module(s) (BLANK-NMS240) must be installed to ensure proper airflow throughout the unit.
,
10
,
10
11
M3
*
6
M3
*
3
.
3
Содержание NMP1K2
Страница 1: ...NMP650 1K2 Instruction Manual...
Страница 21: ...No 28 Wuquan 3rd Rd Wugu Dist New Taipei City 248 Taiwan...