37
7. Anti-scalp wheels
Anti-scalp wheel kits are standard on MEAN GREEN mower units. These anti-scalp wheels are designed
to minimize scalping when mowing on rough uneven terrain. After setting the cutting height, adjust the anti-
scalp wheels so they extend below the deck but
do not contact the ground.
They should always be at
least 6mm to 18mm below the deck. With the unit sitting on a flat level surface, the wheel position can be
adjusted up or down as needed from 18mm to 40mm below the blade surface. Move the wheels up or
down, in 12mm increments, using the different axle mount holes in the wheel mount bracket.
8. ST ALKER SO 122 mower emergency drive brake release levers
If towing or manual pushing is needed:
Located beneath the battery compartment. -
2
levers
on both sides accessible from rear of mower (
Fig.
O1
).
PULL both levers outward to release drive brakes (
Fig. O2
) and PUSH both levers inward to engage drive
brakes (
Fig. O1
).
NOTE: Never drive mower with levers released. Always push levers back to the
engaged position before driving! Failure to re-engage drive levers could cause
serious damage to your mower and void mower warranty!!!!
Anti-scalp wheels
