26
2. Dashboard – Main controls
•
Battery capacity indicator (Fig. I): Indicates battery state of charge and diagnostic information
(including FAULT CODES).
Turn the key to the ON position, wait 3 seconds for diagnostics to load. Display will indicate battery status
and drive conditions with “READY” or “CUT” sign or FAULT indications
.
NOTE:
If FAULT occurs, first reset computer by turning key to OFF position and then to the ON position. If
FAULT continues: Call your authorized MGE MEAN dealer Immediately!
•
Master power ignition switch (Fig. H)
: A two position switch OFF and ON. With key inserted, rotate
key clockwise to the ON position to start mower.
•
PTO deck blades ON and OFF switch (Fig. H)
: This switch engages the deck blade motors. Pull the
yellow switch
up to engage blades and push switch down to disengage blade motors.
NOTE: There
may be few tenths of seconds delay before blades will start!
REFER TO page 28
regarding fault codes and main troubleshooting guide
.
Top dashboard
(from operator
stand point of
view
once
standing
on
platform)
RIGHT SIDE OF
MOWER
LEFT SIDE OF
MOWER
GROUND DRIVE SPEED LOW / HIGH
LED LIGHT
(optional)
BLADE SPEED LOW / HIGH
BLOWER CONTROL (optional)
ON / OFF BLADES CONTROL
KEY SWITCH
CONTACT
Front dashboard
(operator on
platform)
BATTERY CAPACITY INDICATOR
LEFT SIDE OF
MOWER
RIGHT SIDE OF
MOWER
FRONT BLOWER ROTATION CONTROL FRONTAL (optional)
Fig. I
Fig. H
