MDV M0BA30-11CFN1-MQ0W, Техническое руководство

Страница: 63 / 72

Installation
 Page 63 
Be extremely careful not to dent or damage the piping
while bending them away from the unit. Any dents in the
piping will affect the unit’s performance.
3.5 Connect drain hose
By default, the drain hose is attached to the left
hand side of unit (when you’re facing the back
of the unit). However, it can also be attached to
the right-hand side.
1. To ensure proper drainage, attach the drain
hose on the same side that your refrigerant
piping exits the unit.
2. Attach drain hose extension (purchased
separately) to the end of drain hose.
3. Wrap the connection point firmly with Teflon
tape to ensure a good seal and to prevent leaks.
4. For the portion of the drain hose that
will remain indoors, wrap it with foam pipe
insulation to prevent condensation.
5. Remove the air filter and pour a small amount
of water into the drain pan to make sure that
water flows from the unit smoothly.
NOTE ON DRAIN HOSE PLACEMENT:
• DO NOT kink the drain hose.
• DO NOT create a water trap.
• DO NOT put the end of drain hose in water or a
container that will collect water.
Make sure there are no kinks or dent in drain hose to
ensure proper drainage.