MDT Technologies SCN-RT 6AP.01, Руководство пользователя

Страница: 9 / 51

Technical Manual Temperature Controller SCN ‐ RT1
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
9
3 Communication objects
3.1
Default settings of the communication objects
The following chart shows the default settings for the communication objects:
Default settings
Nr. Channel/Input Function Length Priority C R W T U
0 Channel 1 Actual temperature value* 2 Byte Low X X X
1 Channel 1 Higher message value 1 Bit Low X X X
2 Channel 1 Lower message value 1 Bit Low X X X
3 Channel 1 Frost alarm 1 Bit Low X X X
4 Channel 1 Heat alarm 1 Bit Low X X X
5 Channel 1 External sensor 2 Byte Low X X
6 Channel 1 Setpoint comfort 2 Byte Low X X X X
7 Channel 1 Manual setpoint value offset 2 Byte Low X X
8 Channel 1 Control value heating 1 Bit Low X X X
8 Channel 1 Control value heating 1 Byte Low X X X
8 Channel 1 Control value
heating/cooling
1 Bit Low X X X
8 Channel 1 Control value
heating/cooling
1 Byte Low X X X
9 Channel 1 Control value cooling 1 Bit Low X X X
9 Channel 1 Control value cooling 1 Byte Low X X X
10 Channel 1 Mode comfort 1 Bit Low X X X
11 Channel 1 Mode night 1 Bit Low X X X
12 Channel 1 Mode frost/heat protection 1 Bit Low X X X
13 Channel 1 Heating disable object 1 Bit Low X X
14 Channel 1 Cooling disable object 1 Bit Low X X
15 Channel 1 Heating request 1 Bit Low X X X
16 Channel 1 Cooling request 1 Bit Low X X X
17 Channel 1 Heating/Cooling switchover 1 Bit Low X X
18 Channel 1 Max memory value 2 Byte Low X X X X
19 Channel 1 Min memory value 2 Byte Low X X X X
20 Channel 1 Min/Max memory reset 1 Bit Low X X X
21 Channel 1 Reset setpoint value 1 Bit Low X X
22 Channel 1 DPT_HVAC Status 1 Byte Low X X X
23 Channel 1 Error external Sensor 1 Bit Low X X X
24 Channel 1 Actual setpoint 2 Byte Low X X X