Technical Manual IP-Router SCN-IP100.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
7
3 ETS Parameter
3.1 General
The following parameters can be set at the general settings:
Figure 5: General settings
Device name:
The KNX IP Router can be assigned a name of your choice. The device name should be descriptive
(e.g. Line TF). It is used to search for and recognize a device.
Monitoring bus voltage failure:
If a KNX/EIB failure is detected, it is reported on the IP. Return of the bus voltage is also reported.
Parameters: disable, enable
IP address assignment:
Automatic(DHCP):
The IP address is automatically assigned on the DHCP, i.e. additional settings are not
required. To be able to use this function, there must be a DHCP server in the LAN (many DSL
routers have an integrated DHCP server).
Manual:
In this case, the IP address, the subnet and the gateway IP address must be entered
manually.
