Technical Manual IP-Router SCN-IP100.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
3
1 Introduction
The KNX IP Router forwards telegrams between different lines via a rapid LAN (IP) backbone. The
KNX IP Router can also be used as an interface for accessing the bus via IP, replacing an RS232 or USB
interface. It has an external 12 V to 24 V power supply or can alternatively be powered via Power-
over-Ethernet (IEEE 802.3af).
1.1 Installation and connection
The KNX IP Router is designed for installation in a rack with a depth of 2 units. It contains the
following display and control elements: 2 Areas of application
Figure 1: Structure of the hardware device
1:
Connector for external power supply (12 V to 24 V AC/DC)
2:
Connector for KNX/EIB with a bus terminal
3:
Learn key
4:
Learn LED (red)
5:
LED (green):
- Lights up to indicate bus voltage on KNX/EIB
- Flashes to indicate telegram traffic
6:
LED (green):
- Lights up to indicate an Ethernet connection
- Flashes to indicate telegram traffic
7:
RJ 45 socket for connecting an Ethernet patch cable
Chart 1: Structure
