MDT Technologies BE-02001.01, Технические инструкции

Страница: 42 / 52

Technical Manual Universal Interface BE
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
42
4.6. Logic
The universal interface contains of 4 individually switchable and parameterize able logic blocks. At
the following page, the logic blocks can be activated and the general settings can be made:
Figure 21: Activation logic blocks
The following parameter can be adjusted once and is valid for all of the 4 logic blocks:
Sub ‐ function Dynamic range
[default value]
comment
Behavior at bus power up

no read ext. logic objects

read ext. logic objects
sub ‐ function indicates whether the
external logic objects should be read or
not at a bus power up
Table 40: Common Parameter logic blocks
If the read of the external logic at bus power up is activated, the status of all external logic objects
will be read at a bus power up. So the logic operation is evaluated new. If this function is not active,
the universal interface will hold the status before bus power outage.