Opera 240 System Manual
Page 29
3.6. Programming the Ringing Assignment
Each external telephone number connected to the Opera 240 may be programmed to ring a
different user or set of users on incoming calls. The SIP trunk assignment is done on the
‘Ringing assignment’ page in the section ‘External Numbers’. The ISDN ringing assignment is
done on the ‘Ringing Assignment’ page under ‘External Numbers’. The ringing assignment may
be changed for different times of the day. By default, three ringing modes are defined, ’Day
ringing’ and ‘Night ringing’ and Operator Mode and there are two additional modes that can be
defined by the user.
By default, all external lines are programmed to ring the first IP user, e.g. 101, of the Opera 240.
This user, in the default configuration, is defined as sole member of the operator group, group 9.
This ringing assignment can be changed by typing the users or groups or Auto-Attendant
message to be called when an incoming call arrives on a particular line, as shown below and
pressing the SAVE button.
You may proceed to program another ringing mode by clicking on the numbered link below the
table on the left.
