Opera 240 System Manual
Page 12
Opt into a group
# 6 2 * <group number(80 – 88)> #
Set Alarm Call
* 641 * HHMM #
Clear Alarm Cal
# 641 #
Forward on Busy for user
* 6 7 * < destination > #
Cancel Forward on Busy for user
# 6 7 #
Forward on Busy for group
If leader:
* 6 7 * <group number > * < destination > #
If not leader
* 6 7 * <group number > * < destination > * < group
PIN > #
Cancel Forward on Busy for group
If leader:
# 6 7 * < group number > #
If not leader:
# 6 7 * < group number > * < group PIN > #
Activate Roaming PIN
* 6 8 <Roaming Account> <Roaming PIN> #
Deactivate Roaming PIN
# 6 8 #
CallPickUp/CallPickOff
* 7 1 < user number >
Universal pickup
* 7 1 0
Call Transfer Explicit (at dial tone with two calls on hold)
* 7 2
Conference (at dial tone with two calls on hold)
* 7 3
Meet-me Conference bridge access
6900 - 6901
Park/Unpark a call
* 7 4
Retrieve a parked call from an internal user
* 7 5 < user number >
Answer a universal page
* 7 6 *
Answer a page from an extension that’s not being paged
* 76 < user number that is being paged >
Directed page
* 7 7 < user number >
Universal page
* 7 7 *
Intercom (force handsfree answer to system phone user) #77 < user number >
Door opening code
* 7 8
Intrude (at busy tone)
* 7 9
Access voicemail
* 9 9
Connect to a user’s Mailbox
# 9 9 <user number>
Connect to a user’s Mailbox (without hearing welcome
message)
# 9 8 <user number>
Transfer call to Mailbox (While ringing the User)
# 9 9
Direct access to a user when answered by the Auto
Attendant
* + user number
Direct access to a user voicemail when answered by the
Auto Attendant
# + user number
Access voicemail settings (when pressed while listening to
voicemail welcome message)
#
Programming
Code
Program an external number in your personal address
book.
* * < 8 0 0 to 8 1 9 > * < external number > #
Erase a number from your personal address book.
# < 8 0 0 to 8 1 9 > #
Implement Ringing mode (Modes 1 to 5)
* 0 7 * <Ringing Mode > #
Set user PIN
* 70 * * NEW PIN * NEW PIN #
Clear user PIN
* 70 * CURRENT PIN #
Change user PIN
* 70 * CURRENT PIN * NEW PIN * NEW PIN #
Enter System Programming
* * * * # # # #
Play system IP Address
* * 0 1 #
Set system IP Address
* * 0 1 * xxx * xxx * xxx * xxx #
Play system subnet mask
* * 0 2 #
Set system subnet mask
* * 0 2 * xxx * xxx * xxx * xxx #
Play Gateway Address
* * 0 3 #
Set Gateway Address
* * 0 3 * xxx * xxx * xxx * xxx #