MDS 05-3624A01, Rev. B
OEM Series™ I/O Guide
17
ACCESS DENIED
—The command is unavailable to the user. Refer to the
command descriptions for command information.
EEPROM FAILURE
— The
INIT
command was unable to write to EEPROM.
This usually indicates a hardware error. Contact MDS for assistance.
Table 6. Command summary
Command name
Function
Set or display the network address of the radio.
Set or display hex code identifying which events
trigger an alarm.
Set or display the DATA INTERFACE data rate
and format.
Set or display the Clear-to-Send delay in
milliseconds.
Set or display the delay, in milliseconds, at the
end of a CTS line response; CTS Key operation
only.
Set or display the CTS options.
Dekey the radio (transmitter OFF) following a
KEY command.
Set radio parameters to factory defaults.
Key the radio (transmitter ON). Provides a carrier
for testing.
Set or display the owner’s message.
Set or display the owner’s name.
Set or display the transmit power setting.
Display the Received Signal Strength Indication.
Set or display the receive frequency.
Set or display the value of the receive time-out
timer.
Display the radio serial number.
Display the software revision level.
