Screw
figure F
Roof
panel (1)
panel (1)
foam
Tape (10)
(8)
figure G
Roof
Screw
(8)
2.
With the Panel (1) lined up with the marks, attach the panel to the rst frame section,
using the Screws (8) in three places in the center of the end side, as shown in
figure
f
. Do not add screws along the edges yet, until the panels next to it are in place.
3.
Run strips of Tape (10) across the edges of the panel, where other panels will join to
it.
4.
Slide the lower Panel (1) under the edges of the Panel above. Make sure the lower
Panel is square with the Panel above, then install Screws (8) on all edges where another
panel will not connect, as shown in
figure g
.
5. Remember
to
seal
each two Panel connection using Tape (10).
6.
Install all panels in a similar fashion, securing all parts with screws. Install the panels
from the peak down.
7.
When nished installing the Panels (1), run a length of Edge Trim (9) along all exposed
edges of the roof panels. Install the Trim with its longer edge on top/outside and its
short edge on bottom/inside.
SKU 95913
Please DO NOT return unit to store or dealer. For all questions or shortages please contact
PAGE 7
Customer Service at: 800-447-7079 or 203-877-7070
Содержание SC071008JJ
Страница 1: ......
