D-Verter
User Guide, Rev: A/b
13 / 23
O
PERATING INSTRUCTIONS
The MDG
D-Verter
TM
can be controlled either locally, with the keyboard, via DMX (
see DMX
control and RDM Control
). This paragraph focuses on
local control
.
Powered up, the control program configures the Input/Output and loads the configuration
parameters, saved in the EEPROM memory.
At this point, the MDG
D-Verter
TM
switches to stand-by mode, and most of the electronic
controls are off.
Scroll to the
Output
menu.
Normally, at start-up (no DMX signal), you are on the
right
side output.
Switch to
left
, to force the output to toggle on the other side.
When switching from one side to the other, be very careful from being hit by any moving part.
Reduce the pressure input if necessary.
