MD mXion PSD, Руководство пользователя

Страница: 20 / 25

20
PSD
CV-Table
S = Standard, √ = Analog usable
CV Description S √ Range Note
7 Software version – – read only (10 = 1.0)
7 Decoder reset functions
3 ranges available
11
16
33 basic settings (CV 1,11-13,17-19,29-119)
programming lock (CV 15/16)
switch outputs (CV 120-154)
8 Manufacturer ID 160 – read only
7+8 Register programming mode
Reg8 = CV-Address
Reg7 = CV-Value
CV 7/8 don’t changes his real va lue
CV 8 write first with cv-number, then CV 7
write with value or read
(e.g.: CV 49 should have 3)
➔
CV 8 = 49, CV 7 = 3 writing
15 Programming lock (key) 155 0 – 255 to lock only change this value
16 Programming lock (lock) 155 0 – 255 changes in CV 16 will change CV 15
29 NMRA configuration 132 √ 0 = analog deactive, 132 = analog ok
48 Switch address calculation 0 0/1 0 = Switch adress like norm
1 = Switch adress like Roco, Fleischmann
49 MD configuration 0 √ bitwise programming
Bit Value OFF (Value 0) ON
0 1 Engine normal output Engine inverted output
1 2 Turn direction normal Turn direction invers
2 4 A1 normal output A1 inverted output
3 8 A2 normal output A2 inverted output
4 16 A1 normal A1 flashing while turning
114 Reverse loop module switch
current
25 √ 1 - 100 current / 10 (25 = 2,5A)
115 Lock time reverse loop module 12 √ 0 – 255 lock time for switching reverse loop module
time base 100 ms/value