PELLET STOVES
Chapter 3
INSTALLATION AND USE MANUAL
page
17
Installation and assembly
Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.1.2.
Technical characteristics
Technical characteristics
Kaika Oyster
Nominal thermal power
5,4 kW (4644 kcal/h)
Minimal thermal power
2,3 kW (1978 kcal/h)
Yield at maximum
93,4 %
Yield at minimum
94,0 %
Temperature of exhaust smoke at maximum
115°C
Temperature of exhaust smoke at minimum
70°C
Particulate/OGC/Nox (13%O2)
38 mg/Nm3 - 4 mg/Nm3 - 187 mg/Nm3
CO at 13%O
²
at minimum and maximum
0.057 — 0.015%
CO
2
at minimum and maximum
5,9 % – 10,6%
Mass of smoke
3,8 g/sec
Suggested draught at max power
0,10 mbar – 10 Pa
Suggested draught at min power
0,05 mbar – 5 Pa
Hopper capacity
20 litres
Fuel pellet type
Pellet diameter 6-8 mm. Length range 5-30 mm
Pellet consumption per hour
Min ~ 0.5 kg/h * Max. ~ 1.2 kg/h *
Operating time between re-fuelling
At min~ 25 h * At max. ~ 11 h *
Heatable volume m
3
116/40 – 133/35 – 155/30 **
Combustion air inlet
External diameter 50 mm.
Smoke outlet
External diameter 80 mm.
Air inlet
80 cm2
Maximum absorbed electrical power
80 W (Max.
320 W)
Power supply frequency and voltage
230 Volt / 50 Hz
Net weight
120 Kg.
Weight with packaging
130 Kg.
* Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/m
3
40-35-30 (respectively 40-35-30 Kcal/h for m
3
)
