MCZ FORMA WOOD 75 DX-SX, Инструкция по использованию и установке

Страница: 19 / 30

FORMA WOOD CLOSED FIREPLACE Chapter 4
USE AND MAINTENANCE MANUAL
page
19
Installation and assembly Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
C
4.5.
ADJUSTING THE HEIGHT AND LEVEL
The Forma Wood closed fireplace is fitted with adjustment feet that
create the right distance between the unit and the floor and adjust the
level of the fire plane of the closed fireplace by approximately 10 cm.
Should you wish to raise the closed fireplace more than 10 cm you
must create a masonry pedestal on which to rest the product. Do not
remove the feet under any circumstances as these are
essential for levelling the appliance. Removal of the feet is
deemed to be a structural modification to the product and, as
such, invalidates the guarantee.
Adjusting the level of the closed fireplace is an
essential operation to allow the fire door to slide
correctly.
If the floor is made from flammable material, the
lower part of the closed fireplace (C) must be
positioned at least 5 cm away from the floor (
figure
5).
If the closed fireplace is not level there is a risk that
the door may not close perfectly and the internal
counterweights may bang against the structure
making a noise each time the door is raised and
lowered.
CHECK THE SLIDING ACTION OF THE DOOR A FEW
TIMES BEFORE SEALING THE CLOSED FIREPLACE
WITH THE CLADDING.
We recommend that you use the wheels (supplied) when moving the
closed fireplace. Only the feet are needed to adjust the level.
Figure 5 – Safety measures