McQuay T170 Скачать руководство пользователя страница 3

McQuay IM 846

3

Installation Instructions

Installation Instructions

Thermostat Model and Part Number

McQuay offers two different thermostats depending on the fan 
speed control used (Table 2).

Table 1: Thermostat model and part numbers

Note –

For a list of thermostat features, refer to ED 3611.

Optional Occupancy Detection Sensors/Kits

In addition to the T170 thermostat, McQuay offers optional 
occupancy detection sensors (see page 9) that can be ordered 
and used in conjunction with the thermostat. When ordering, 
use the associated kit number(s) provided in Table 2.

Table 2: Occupancy sensor model and kit numbers

Mounting and Wiring the Thermostat

The thermostat base mounts to a field provided 4

 × 4

 outlet 

box with a 2

 × 4

 mud ring (Figure 1). The thermostat cover 

assembly mounts to the thermostat base.

Figure 1: Mounting the thermostat

1

Disconnect power before installing or servicing.

2

Run line voltage wiring (and low voltage wiring if 
applicable) into the field provided outlet box and mud ring 
(Figure 1).

3

Locate all connections within the mud ring/connection box 
and wire nut all unused wires.

4

Remove the thermostat cover assembly from its base to 
gain access to the circuit board (Figure 2).

Figure 2: Circuit board

WARNING

BEFORE ATTEMPTING TO INSTALL, OPERATE, OR 
SERVICE THIS THERMOSTAT, CAREFULLY READ 
THESE INSTRUCTIONS. 

Failure to observe safety information and comply with 
instructions could result in PERSONAL INJURY, DEATH, 
AND/OR PROPERTY DAMAGE.

To avoid potential fire and/or explosion, do not use in 
potentially flammable or explosive atmospheres.

Retain these instructions for future reference. This product, 
when installed, is part of an engineered system whose 
specifications and performance characteristics are not 
designed or controlled by McQuay. You must review your 
application and national and local codes to assure that your 
installation is functional and safe.

DANGER

Hazardous voltage. To avoid electrical shock or damage to 
equipment, disconnect power before installing or servicing.
Failure to follow these instructions will result in death or serious 
injury.

Thermostat Model #

McQuay Part #

Fan Speed Control

TA170-001

107345335

3-Speed Fan Control

TB170-001

107345336

Staged Fan

Sensor Model #

McQuay Kit #

SA200-001

6677877211

SB200-001

6677877311

SD200-001

6677877411

SB200-002

6677877511

2 × 4 mud ring

Cover locking snaps
(both sides)

Base

Cover assembly

CAUTION

To avoid damaging the unit,
make all wiring connections
inside the box.

4 × 4 outlet box

Содержание T170













Отзывы: