IM 882 / Page 25 of 36
COOL
DAY 1
AM
8:00
MORN
3.1
The touchpad of the electronic controller can be
programmed for four time periods,
MORN,
DAY, EVE
, and
NITE
that are customizable for
each day of the week. Each period will have a
start time, heat and cool temperatures. The unit
will monitor the day and time, while maintaining
the specific conditions for each period of the
day. During programming, the item that is
flashing is adjustable.
3.2
To enter the program menu, press
SLEEP
( )
and
MODE
( ) buttons for 5 seconds.
3.3
By pressing
SLEEP
( ) display will show
the day screen as shown below. Press
or
button to change the day to program. To advance
to the next screen, press
SLEEP
( ) button. To
return to the previous screen, press
MODE
( )
button.
3.4
By pressing
or button, the period of the
day will change.
3.5
To advance to the next screen, press
SLEEP
( ) button. Starting time will flash.
Adjust the starting time by pressing
or
buttons.
3.6
To advance to the next screen, press
SLEEP
( ) button. Heat temperature will be
displayed. Adjust the heat setting with
and
buttons.
3.7
To advance to the next screen, press
SLEEP
( ) button. Cool temperature will be
displayed. Adjust the cool setting with
and buttons.
3.8
To program the thermostat for each period of the
day, repeat steps 3.3 through 3.7.
Further, the thermostat can be programmed for
each individual day of the week or use the
Simpleset
TM
feature as described below.
3.9
Simpleset
programming is a convenient method
of programming the thermostat. Once the entire
Monday (Day 1) schedule is set,
Simpleset
programming will copy the Monday schedule to
every day of the week. After completing
Monday schedule, “day 2” will appear on the
screen. Press Down button once to get to “day 1.”
By pressing Down button for 3 seconds, days of
the week will count down from 7 to 1 and settings
are memorized. Once the schedule is locked in, go
through each day of the week and make changes as
needed. This feature speeds up the programming of
the standard weekday/weekend schedule.
3.10
To exit the program mode, press
MODE
( )
and
SLEEP
( ) buttons simultaneously for 5
seconds.
3.11
After exiting the program mode, select the mode
of operation and activate the program mode by
pressing the
PROG ON/OFF
button.
After a power outage, programmed daily settings will be
retained in memory. However, the clock must be reset to the
current time for the programmed daily settings to resume
the correct schedule of operation. See Clock Set Menu
instructions to reset the time and day of week.
Controls
Premium Digital Touchpad Control
NOTICE
78
o
DAY 1
MORN
DAY 1
AM
8:00
MORN
DAY 1
HEAT
AM
8:00
MORN
70
o
