MCOHome MH7-WH, Руководство пользователя

Страница: 5 / 8

www.mcohome.com User Manual
MCOHome Technology Co., Ltd
5
Auto Mode Time Periods Parameter Setting

In normal working interface, short press S1 to enter into time periods setting. Four time
periods can be set for each day of the whole week.

Press S2 can switch among “Hours, Minutes, Temperature value”. Press S4 or S5 can change
the value.

After finished the setting of 4 time periods on Monday, press S1 and follow the same way to
set periods of next days.

After all periods set, press S1 /S2 or wait 25 seconds without any key operation will save the
setting and return to normal display. Device will operate in accordance with the new setting.
The default setting is as follow:
High temperature protection (For MH7-EH Electrical Heating ONLY)
When external temperature sensor detect the temperature value
≥
55
℃
, device will open high
temperature protection, electric heating will be forced off, and high temperature protection icon
displays.
When external temperature sensor detect the temperature value
＜
50
℃
, device will return to
normal work, high temperature protection icon disappears.
Anti-freeze protection function: (Optional)
In shutdown interface:

When the built-in temperature sensor detect the temperature value
≤
5
℃
, device will open
anti-freeze protection, electric heating will be forced open, and anti-freeze protection icon
displays.
When the built-in temperature sensor detect the temperature value
＞
8
℃
, device will turn
off anti-freeze protection and return to normal work, anti-freeze icon disappears.
Note: If MH7 thermostat do not connect with an external temperature sensor, it will only display
the indoor temperature icon; If MH7 thermostat connect with an external temperature sensor, it
will display the indoor temperature and high temperature protection icon; When it is under high
temperature protection, high temperature protection icon flickers.
Z-Wave Operation

Including & Excluding of Z-Wave network
In normal working interface, press & hold S4 to enter interface for inclusion or exclusion of
Z-Wave network. Before device included into network, “- - -” will display on the screen. Then
press S4 once, device will enter learning mode to get a node ID. If inclusion is success, a node ID
will display on the screen in a few seconds.
A node ID can always inform us whether the device is in the network or not.
Week\Periods Period 1 Period 2 Period 3 Period 4
Mon~Fri 5:00 18 ℃ 7:00 16 ℃ 16:00 22 ℃ 21:00 16 ℃
Sat~Sun 6:00 18 ℃ 8:00 16 ℃ 16:00 22 ℃ 21:00 16 ℃