MCOHome A8-9, Руководство пользователя

Страница: 3 / 7

www.mcohome.com User Manual
MCOHome Technology Co., Ltd
3
 Hold F2 and the device enters into learning mode, then turns blue and the device is added
into Z-Wave network.
 Follow the same steps to remove the device from network.
 Association Group
Device supports 1 association group:
AG
identifier
Max
Node ID
Command Classes Trigger situation
0x01 1
COMMAND_CLASS
_SENSOR_MULTIL
EVEL_V5,
SENSOR_MULTILE
VEL_REPORT_V5
Detected value will be reported according to:
1, PM2.5 The value difference between current value
and previous reported value >0x01 set value, set value
≠
0;
2, CO2 The value difference between current value
and previous reported value > 0x02 set value, set
value
≠
0;
3, Temperature The value difference between current
value and previous reported value > 0x03 set value,
set value
≠
0;
4, Humidity Thevalue difference between current
value and previous reported value > 0x04 set value,
set value
≠ 0;
5, VOC The value difference between current value
and previous reported value > 0x05 set value, set
value
≠ 0;
6, Illumination The value difference between current
value and previous reported value > 0x06 set value,
set value
≠
0;
7, Noise The value difference between current value
and previous reported value > 0x07 set value, set
value
≠
0;
8, PIR The current state is different from previous
reported state, set value
≠
0;
9, Smoke The current state is differentfrom previous
reported state, set value ≠ 0;
10, Smoke IntervalReport Timer set value: 0x0A and
set value ≠ 0;
11, PIR IntervalReport Timer set value: 0x0B and
set value
≠
0;
12, PM2.5 IntervalReport Timer set value: 0x0C and
set value
≠
0;
13, CO2 IntervalReport Timer set value: 0x0D and
set value ≠ 0;
14, Temperature IntervalReport Timer set value: