www.mcohome.com User Manual
MCOHome Technology Co., Ltd
1
9 in 1 Multi-Sensor
A8-9
MCOHome A8-9 is a Z-Wave enabled multiple environmental monitoring sensors, with 3.5 inch TFT
clear display and compliant to Z-Wave Plus standard. It is built in with
Temperature, Humidity,
PM2.5, CO2, VOC, PIR, illumination, Noise, Smoke
sensors. Device can be added into any Z-Wave
network, and is compatible with any other Z-Wave certified devices.
Temperature: 0~50℃
Humidity: 0%RH~99%RH
PM2.5: 0~500ug/m3
CO2: 0~5000ppm
VOC: 0-64000ppb
PIR: 0 or 1 Detection angle up to 120°
Illumination: 0~40000Lux
Noise: 30dB~100dB
Smoke: 0 or 1
Specification
Power Supply: DC12V
Self-dissipation:<3W
Work environment:-20~+60
℃
<99%RH
(Non-condensation)
Dimension: 110* 110*32mm
Hole Pitch: 60mm or 82mm
Housing: Tempered glass+ PC Alloy
Installation: Wall-mounted (Vertical)
Safety Information
To protect yourself and others from danger and to protect the device from damage, please read the
safety information before using it.
Important!
A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete installation following the instructions.
Before installation, please confirm the real voltage complying with the device’s specification.
Cut off any power supply to secure the safety of people and device.
During installation, protect the device from any physical damage by dropping or bumping. If
happens, please contact the supplier for maintenance.
Keep the device away from acid-base and other corrosive solids, liquids, gases, to avoid damage.
Avoid overexertion during operation, to protect device from mechanical damage.
Read all instructions and documentation and save for future reference.
