mcmurdo Smartfind M10, Руководство пользователя

Страница: 76 / 86

76
transmission is broadcasted every 6 minutes; however, the MMSI and
dynamic information, (position update) will be sent out every 3 minutes
if the vessel is moving slower than 2 knots or every 30 seconds in
moving faster than 2 knots. In addition to this, if the receiving party is
using a non-standard dual channel receiver or a single channel
receiver, then in ideal conditions, the receiver will get your full static
information every 12 minutes and your MMSI and dynamic information
every 6 minutes if you are moving slower than 2 knots.
No data is being received by chart plotter

Please check that the power supply is connected correctly to the
Smartfind M10.

Please check that the power supply is 12V or 24V with sufficient
current capacity (no less than 2A).

Please make sure that the connections between the Smartfind M10
and the chart plotter are correct.
My chart plotter is showing COG or HDG alarms when
the Smartfind M10 is running

Use configuration software, ALR sentence option to turn off ALR
sentences.