McIntosh MDLP1 Скачать руководство пользователя страница 2

Страница: 2 / 32

The lightning ﬂash with arrowhead,

within an equilateral triangle, is

intended to alert the user to the

presence of uninsulated “danger-

ous voltage” within the product’s

enclosure that may be of sufﬁcient

magnitude to constitute a risk of

electric shock to persons.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other apparatus

(including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A ground-

ing type plug has two blades and a third ground-

ing prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience re-

ceptacles, and the point where they exit from the

apparatus.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of im-

portant operating and maintenance

(servicing) instructions in the litera-

ture accompanying the appliance.

WARNING - TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or

back. No user-serviceable parts inside.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

11. Only use attachments/accessories speciﬁed by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer,

or sold with the apparatus. When a

cart is used, use caution when mov-

ing the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualiﬁed service person-

nel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the appara-

tus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. Do not expose this equipment to dripping or

splashing and ensure that no objects ﬁlled with liq-

uids, such as vases, are placed on the equipment.

16. To completely disconnect this equipment from the

a.c. mains, disconnect the power supply cord plug

from the a.c. receptacle.

17. The mains plug of the power supply cord shall

remain readily operable.

18. Do not expose batteries to excessive heat such as

sunshine, ﬁre or the like.

Содержание MDLP1

































Результаты поиска

Содержание MDLP1

Отзывы:

Похожие инструкции для MDLP1

Бренды по названию

Популярные бренды

McIntosh MDLP1, Руководство пользователя

Результаты поиска

Содержание MDLP1

Отзывы:

Похожие инструкции для MDLP1

Бренды по названию

Популярные бренды