background image

7

Introduction

Performance Features

•DLP Chip

The McIntosh MDLP1 Video Projector incorporates the 

latest and largest available Digital Light Processing (DLP) 

Dark Chip for use in a Home Theater Projector. The large 

chip size is 0.95 inch and produces a High Definition Im-

age of 1920 x 1080 pixels.

• Advanced Optical System

The light source for the projector is the industry’s only 200 

Watt DC Super High Pressure lamp assembly. This assures 

an image with even illumination, focused from edge to 

edge and accurate fully saturated colors. The light is fil-

tered by a large 98mm 7-segment color wheel incorporat-

ing a Neutral Density Filter Segment which enhances the 

black level during dark scenes. After the light is reflected 

by the DLP Chip, it is then precisely focused by a Konica-

Minolta custom designed zoom lens. This lens is fully 

sealed and consists of 13 all-glass elements. The optics al-

low screen sizes ranging from 70 inches to 250 inches with 

a 16:9 wide aspect ratio for the Medium Throw Lens or 80 

inches to 300 inches with a 16:9 wide aspect ratio for the 

Long Throw Lens.

• Advanced Filter Wheel Design

The color filter wheel spins at 10,800 RPM, making color 

breakup (rainbow effect) a thing of the past. The quiet 

filter wheel motor uses a Fluid Dynamic Bearing for silent 

and reliable operation.

• Placement Compensation

The MDLP1 Projector incorporates numerous adjustments, 

compensating for less then ideal projector/screen position-

ing. These adjustments include a Lens shift feature for 

vertically positioning the projection point, digital correc-

tion of vertical keystone distortion and projection modes for 

functional, hanging and rear projection.

• Enhanced Video Processing

The Video Circuitry uses the very latest in processing 

algorithms to produce an excellent image regardless of the 

The McIntosh MDLP1 Video Projector is one of the finest 

projectors ever created. It utilizes the latest Digital Micro-

mirror Device

TM

 containing over 2 million individual pixels 

(1080p) and produces images of such high quality, it’s just 

like being there.

Connectors and Cable Information, Introduction and Performance Features 

video source, from 480i to 1080p. There is a special 1080p 

direct pixel pass through mode when the MDLP1 Projector 

is used with the McIntosh VP1000 Video Processor.

• Video Adjustments

The MDPL1 allows for complete adjustment of all the im-

portant image quality effecting parameters, such as Color 

Temperature, Gamma and Black Level. There are also user 

adjustments with the ability to store the settings for future 

recall, along with three preset modes (Theater, Standard 

and Dynamic).

• HDMI Connectivity

The MDLP1 has two HDMI (High-Definition Multimedia 

Interface) inputs and accepts 1080p signals.

• Total Component Integration

The MDLP1 is designed to work seamless with the McIn-

tosh VP1000 Video Processor and the McIntosh AP1000 

Audio Processor.

• On-Screen Information Displays

The On-Screen Display indicates the Source Selection and 

Information about the source signal. The Menu Selections 

and Adjustments are also displayed on screen.

• Die Cast Internal Chassis

The MDLP1 die cast aluminum internal chassis assures 

the precise mechanical alignment of the entire hermetically 

sealed optical light path, which is necessary for a sharp, 

highly detailed and accurate color image. The die cast 

chassis also assures low operating noise and also helps to 

dissipate heat away from the sensitive internal components.

• Machined Top and Bottom Panels

The MDLP1 Top and Bottom Panels are machined from 

thick aluminum with a smooth black anodized finish.

• Special Power Supply

Fully regulated Power Supplies ensure stable noise free 

operation even though the power line varies.

• Fiber Optic Solid State Front Panel Illumination

The even illumination of the Top Panel is accomplished by 

the combination of a custom designed Fiber Optic Light 

Diffuser and a extra long life Light Emitting Diode (LED). 

The glass Top Panel ensures the pristine beauty of the 

MDLP1 will be retained for many years.

Digital Micromirror Device, Digital Light Processing, DLP, DLP logo, and DLP 

Medallion logo are registered trademarks of Texas Instruments.

Содержание MDLP1

































Отзывы: