10
Specifications
Specifications
Power Output Per Channel
110 watts into 4 ohm load is the minimum sine wave con-
tinuous average power output per channel.
Power Output Bridged
220 watts into 4 ohm loads is the minimum sine wave con-
tinuous average power output.
Output Load Impedance
4 or 8 ohms
Rated Power Band
20Hz to 20,000Hz
Total Harmonic Distortion
0.005% maximum at any power level from 250 milliwatts
to rated power per channel.
Intermodulation Distortion
0.005% maximum if instantaneous peak output per channel
does not exceed twice the rated output for any combination
of frequencies from 20Hz to 20,000Hz.
Dynamic Headroom
1dB
Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 50,000Hz
Sensitivity
.3 to 3 volts
Signal To Noise Ratio
110dB below rated output (A-weighted)
Input Impedance
10,000 ohms
Load Stability
2 ohms
Power Requirements
13.7 Volts DC, 1.3 amps (idle) - 35 amps (rated power)
Dimensions
10 inches (25.4 cm) wide, 9.5 inches (24.1 cm) high, 2.653
inches (6.74cm) depth
Weight
6.6 pounds (3 Kg) net, 8.6 pounds (3.9 Kg) in shipping car-
ton
