5
Installation
Installation
Top View of
the MCC222
Side View of
the MCC222
It is recommended that the MCC222 and any associated
mobile audio equipment be installed by a professional who
is skilled in all aspects of installation and operation.
Always provide adequate ventilation for the MCC222.
The amplifier requires air flow in and out of the sides of
the heatsinks. Be sure to provide at least 1 inch clearance at
the sides of the heatsinks. The amplifier can be mounted
vertically or horizontally and may be located under a seat if
adequate clearance is available. The preferred installation
method is to mount the amplifier directly to the vehicle
main frame using the hardware supplied with the amplifier.
It is not recommended that the amplifier not be mounted
under the hood or in a location where it will be directly ex-
posed to the elements. The openings in the side vents can
be damaged by exposure to water, chemicals or any form
of road dust or debris.
To access the connecting terminals, remove the screws
holding the gold end caps on both sides of the amplifier
and lift the end caps off. The Top Panel Controls and
Switches are accessible by removing the Top Panel by re-
moving the four screws and carefully lifting off the top
panel.
Remove End
Cap Screw
Remove End
Cap Screw
Remove End
Cap Screw
Remove End
Cap Screw
Remove Top Panel Screws
Remove Top Panel Screws
