McGREGOR MET3525, Оригинальное руководство пользователя

Страница: 17 / 20

Customer helpline 0345 605 2065
17
Technical data
Technical data table
Model MET3525 MET4530 MET6032
Voltage 230-240V~50/60Hz
Power input 350W 450W 600W
No load speed 10500/min 9500/min
Cutting width 25cm 30cm 32cm
Diameter of line 1.65mm
Line length 2*3m 2*5m
Protection class
/II
Machine weight 2.0kg 2.6kg 2.8kg
Noise and technical date
MET3525:
A weighted sound pressure L
pA
= 78dB(A)
K
pA
=3 dB (A)
A weighted sound power L
wA
= 93.6dB(A)
MET4530:
A weighted sound pressure L
pA
= 78dB(A)
K
pA
=3 dB (A)
A weighted sound power L
wA
= 93.7dB(A)
MET6032:
A weighted sound pressure L
pA
= 80dB(A)
K
pA
=3 dB (A)
A weighted sound power L
wA
= 95.8dB(A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration a
h
= 2.5m/s
2
uncertainty K= 1.5m/s
2
WARNING
: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING
: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.