McGREGOR MET3525, Оригинальное руководство пользователя

Страница: 10 / 20

Customer helpline 0345 605 2065
10
Prepare
3. ADJUSTING THE CUTTING ANGLE
WARNING:
Always disconnect the trimmer before making adjustments!
1) Put one foot on the motor housing portion of the trimmer head, then grip the main handle and
apply adequate force on the main handle pushing it downwards, as shown in Fig. E1.
2) Adjust the main handle angle upwards, put one foot on the safety guard area of the trimmer head,
then grip the main handle, apply adequate force to adjust, as shown in Fig. E2.
4. MAINS SUPPLY CABLE STRAIN RELIEF (See Fig. F)
Double the main supply cable, about a foot from the end. Lead the loop through the hole on the rear
handle and hook the loop over the upper cable holder. Gently pull on the cord to ensure that it is
firmly attached at the handle.
E1 E2
F
5. FLOWER GUARD (See Fig. G)
Lift the flower guard up when edging and put it down before trimming, as shown in Figure G.
Before trimming or edging make sure the flower guard is locked firmly in position.
G
Preparing instructions