McGREGOR MET3525, Оригинальное руководство пользователя

Страница: 13 / 20

Customer helpline 0345 605 2065
13
Operate
Operating instructions
2. EDGING
Change the tool from trimming to edging mode 01:
1) Adjust the cutting angle to be in the lowest horizontal setting as shown in Fig. K1.
2) Push the handle rotation locking button downward and rotate the main handle clockwise at 90
degree(Fig. K2, K3).
Change the tool from trimming to edging mode 02:
1) Adjust the cutting angle to 30 degree to 50 degree as shown in Fig. K4.
2) Push the handle rotation locking button downward and rotate the main handle clockwise at 180
degree(Fig. K5, K6).
While edging, only allow the tip of the line to make contact with area being worked. Do not force the
line. Take extra caution while edging as objects can be thrown from the trimmer line.
K1
1
2
K2
K3
K4
30
o-
50
o
K6
1
2
K5