Operation
3 - 1
Read Before Operating
Before operating this machine, please read this manual
thoroughly and keep a copy available for future reference.
Return manual to the protective storage box when not in use. This
manual is to be considered part of your machine.
TX00401-9-15-94
Stop-12-28-95
Check Oil Level
Check oil level in the reservoir and verify that oil is visible in the
strainer.
Refer to the “Hydraulic Fluids” section of this manual for
hydraulic oil recommendations.
If oil is not visible in the reservoir strainer, fill reservoir until oil is
visible in the strainer.
Do not overfill reservoir.
Never allow dirt, water, or other foreign matter to enter the tank.
Use only clean oil from an unopened container.
TX02305-7-28-04
PH02710-07-29-04
Diesel Engine
Read the operating and maintenance instructions for the engine
before operating.
The key ignition has four positions. Preheat, off, run and start.
NOTICE:
Set the engine to slow speed before starting. Never use
starting fluid.
Open facer valve and unplug the heater. Turn switch to preheat,
for five seconds. A horn will sound to signify low oil pressure.
Turn the key to the right to start the engine.
Turn the key to OFF to stop the engine.
TX01869-11-8-00
PH01969-11-15-00
Gas Powered Units
Read the operating and maintenance instructions for the engine
before operating.
Set the engine speed to choke position. Open facer valve and
disconnect heater before starting engine. Turn key to start.
Gradually back off the choke position as engine warms up.
Turn key to stop.
TX01990-1-10-02
PH01926-11-15-00
Содержание TracStar 28
Страница 63: ......