McElroy TracStar 28, Руководство оператора

Страница: 12 / 63

Crush Points
Hydraulically operated jaws are operated under
pressure. Anything caught in the jaws will be
crushed. Keep fingers, feet, arms, legs, and
head out of the jaw area. Always check pipe
alignment with a pencil or similar object.
TX00103-4-6-93
Fusion Equipment Safety
WR00012-12-4-92
1 - 5
Facer Blades Are Sharp
Facer blades are sharp and can cut. Never
attempt to remove shavings while the facer is
running, or is in the facing position between the
jaws. Use care when operating the facer, and
when handling the unit.
NOTICE:
Disconnect power from the facer, and remove the facer
blades before attempting any maintenance or adjustment.
TX00102-4-16-93
WR00073-4-6-93
Units With Hydraulics
Although the hydraulic pressures in this machine are low
compared to some hydraulically operated equipment, it is
important to remember that a sudden hydraulic oil leak can cause
serious injury, or even be fatal if the pressure is high enough.
Escaping fluid under pressure can penetrate the
skin causing serious injury. Keep hands and
body away from pinholes which eject fluid under
pressure. Use a piece of cardboard or paper to
search for leaks. If any fluid is injected into the
skin, it must be immediately removed by a doctor
familiar with this type of injury.
NOTICE:
Wear safety glasses, and keep face clear of area when
bleeding air from hydraulic system to avoid spraying oil into eyes.
WR00078
-4-8-93
TX00110-8-23-95