McElroy Socket Fusion, Руководство оператора

Страница: 13 / 18

3 - 2
Operation
Heater Temperature
The socket faces of the heater must be at the temperature specified
by the pipe manufacturer.
Use a pyrometer to check the temperature on the socket faces.
TX01405-6-20-97
Heater Is Not Explosion Proof
This heater is not explosion proof. Operation
of heater in an explosive atmosphere without
necessary safety precautions will result in serious
injury or death.
If operating in an explosive atmosphere, the heater should be
brought up to temperature in a safe environment, then unplugged
before entering the explosive atmosphere for fusion.
Use a clean non-synthetic cloth to clean the heater adapter
surfaces.
TX01411-05-30-14
PH
04
211-6
-14
-10
PH
04
20
3-6
-11-10
¡PELIGRO!
Heating The Pipe and Fitting
Firmly seat the socket fitting on the male adapter of the heater.
Place the female adapter of the heater over the end of the pipe,
firmly against the cold ring clamp.
Heating time starts when the heater is bottomed out on the cold
ring clamp.
Heat fitting and pipe for the pipe manufacturer’s specified period
of time.
NOTICE: Do not twist fitting, pipe or heater
TX01406-6-20-97
PH
04
20
4-
6-11-10