background image

1 - 1

Equipment Safety

Safety Alerts

This hazard alert sign      

appears in this manual. 

When you see this sign, carefully read what it says. 

YOUR SAFETY IS AT STAKE.
You will see the hazard alert sign with these words: 

DANGER, WARNING, and CAUTION.

Indicates an imminently hazardous  

situation which, if not avoided, will  

result in death or serious injury.
Indicates a potentially hazardous  

situation which, if not avoided, could  

result in death or serious injury.
Indicates a hazardous situation which,  

if not avoided, may result in minor or  

moderate injury.

In this manual you should look for two other words: 

NOTICE

 and 

IMPORTANT

.

NOTICE:

 can keep you from doing something that might 

damage the machine or someone's property. It may also 

be used to alert against unsafe practices.

IMPORTANT

: can help you do a better job or make 

your job easier in some way.

TX00030-12-1-92

¡PELIGRO!

¡PELIGRO!

WR000

51-11-

30

-9

2

Read and Understand

Do not operate this equipment until you have carefully read, 

and understand all the sections of this manual, and all other 

equipment manuals that will be used with it.
Your safety and the safety of others depends upon care and 

judgment in the operation of this equipment.
Follow all applicable federal, state, local, and industry specific 

regulations.
McElroy Manufacturing, Inc. cannot anticipate every possible 

circumstance that might involve a potential hazard. The warnings 

in this manual and on the machine are therefore not all inclusive. 

You must satisfy yourself that a procedure, tool, work method, or 

operating technique is safe for you and others. You should also 

ensure that the machine will not be damaged or made unsafe by 

the method of operation or maintenance you choose.

TX02946-4-15-09

WR000

52

-12

-1-9

2

Содержание LineTamer



































Отзывы: