5 - 2
Operation
Start Engine
Turn the fuel valve to the ON position. Move the control lever to
the CHOKE position. Pull the starter rope lightly until resistance is
felt, then pull briskly.
NOTICE:
Do not allow the starter grip to snap back against the
engine. Return it gently to prevent damage to the starter.
When the engine warms up, move the control lever from the
CHOKE position to the operating position.
TX00963-5-17-96
Before Starting Operation
Always ensure that the pipe and preparation machine are properly
lined up in the pulling direction and that the feed height is equal
to, or higher than the pipe guide.
Always ensure that roller stops are installed before pulling. Check
that roller size is correct for pipe being used.
TX00588-8-10-95
Cutting Steel Bands
Coiled pipe can uncoil with considerable force,
causing extreme bodily injury if not properly
contained. Do not cut the steel bands around the
coil until the coil is contained in a suitable reel
trailer or coil cage.
Do not cut plastic bands at this time.
TX00590-8-10-95
PH00
84
3-5-17
-9
5
PH00
49
8-9-1-9
5
Cutting Plastic Bands
It may be necessary to cut the plastic bands on the coil during
the pulling operation. These bands can slide together and "bunch
up", posing a possible area for the pipe to kink. Use a long
handled blunt nose cutter to avoid putting arms and hands inside
the coil trailer/cage.
TX00620-9-1-95
PH0112
9-
3-
31-9
7
ST
OP
-12
-2
2-
92
Содержание LineTamer
Страница 34: ......
