2 - 3
Overview
Fuel Valve
The fuel valve should be turned off when transporting the equipment,
or when not being used.
Turn the valve control in to turn off. Turn the control out to turn on.
TX00958-5-14-96
Hydraulic Power Unit
(A
) Hydraulic fluid fill.
(B)
Gasoline fill.
(C)
Starter rope.
(D)
Engine oil check and fill.
(E)
System pressure gauge
The hydraulics are an open center flow system. The pressure relief valve
is set at 2500 psi.
TX00957-5-14-96
Engine Control Lever
All the way back to the left, shuts the engine off. All the way forward
to the right, is the choke position. Between these two positions, the
desired engine speed can be set.
IMPORTANT:
Do not use the choke if the engine is warm or the
ambient temperature is high.
TX00959-5-14-96
PH00
82
3-
4-
26
-9
6
PH00
82
3-
4-
26
-9
6
Hydraulic Fluid
Check fluid level in reservoir. Proper level is indicated on the
sight gauge. If level drops below this point, fill reservoir to the
HIGH level on the sight gauge. Refer to the "Hydraulic Fluids"
section of this manual for hydraulic oil recommendations.
Never allow dirt or other foreign matter to enter the open tank.
TX00960-5-16-96
PH00
82
5-5-
2-
96
PH00
82
2B-5-13-9
6
Содержание LineTamer
Страница 34: ......
