background image

Table of Contents

Equipment Safety

Safety Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Read and Understand  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
General Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Wear Safety Equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Equipment is Not Explosion Proof  . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Units With Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Heater is Hot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Fusion Machine Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Overview

The Datalogger® 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Pressure Sender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Connecting to a Fusion Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Trimble® Nomad® Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Operation

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Setting up to Log a Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

DL4c Software User’s Guide

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Microsoft® Software (for transferring joint reports)  . . . . . . . . . . . . . . . 4-1
McElroy Software (for viewing, printing, and analyzing joint reports)  . . 4-2
Transferring Joint Reports with Windows® Mobile Device Center
(Window® 7 and Vista®). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
View Joint Reports with the McElroy DL4c . . . . . . . . . . . . . . . . . . . . . . 4-9
Transferring Joint Reports with Microsoft® Active Sync for 
Windows® XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Maintenance

Usage and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
No User Serviceable Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Specification

McElroy Datalogger® 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

COPYRIGHT© 2014, 2013, 2012

McELROY MANUFACTURING, INC.

Tulsa, Oklahoma, USA

All rights reserved

All product names or trademarks are property of their respective owners. All information, 

illustrations and specifications in this manual are based on the latest information available at 

the time of publication. The right is reserved to make changes at any time without notice.

TX04402-2-29-12

Содержание Datalogger 4









































Отзывы: