McElroy Datalogger 4, Руководство оператора Оригинальные инструкции по эксплуатации

Страница: 18 / 40

3 - 8
Operation
Setup to Log a Joint (cont’d)
NOTE: This is only a demonstration. Data used is fictitious and for demon-
stration purposes only. Do not use this graph as a benchmark for inspecting
other fusion joints. There are several factors that determine what a graph
should look like and all graphs will not look exactly the same. Training and
resources are available to assist in how to interpret a graph.
The appearance of joint reports varies due to several factors, but their basic
profile resembles the following samples:
The DataLogger 4 features FusionGuide™ which applies shaded areas
to the plots in order to quickly determine whether a logged fusion joint
is within the selected fusion specification. The shaded areas highlight the
heat soak time (green), open/close time (red), and fuse/cool time (blue).
The front-end plot of the report highlights the soak cycle during which the
pipe ends are heat-soaked.
Tap Next >> or press the Right Soft Key to view the Heater Removal Plot.
Tap << Back or press the Left Soft Key to go back to the previous page.
The Heater Removal Plot estimates the carriage open/close time period.
Tap Next >> or press the Right Soft Key to view the Summary Plot.
Tap << Back or press the Left Soft Key to go back to the previous page.
The Summary Plot shows the entire fusion process.
Tap End >> or press the Right Soft Key to end viewing the current joint
report and back to the main screen.
Tap << Back or press the Left Soft Key to go back to the previous page.
PH04988-11-14-13
PH04989-11-14-13
PH04990-11-14-13