McElroy 2CU, Руководство оператора

Страница: 3 / 34

Introduction
Thank you for purchasing this
McElroy product.
The 2CU (Combination Unit) model fusion machine is designed
with butt fusion and sidewall fusion capabilities. The narrow
clamp design provides for butt fusion of tees, ells and other
fittings without added adapters and allows precise pipe
alignment at the fusion joint.
The 2CU model fuses 1/2" CTS to 2" IPS pipe (20mm to
63mm).
Sidewall clamps with chain vise permit fixing unit to centerline of
pipe main for saddle fusion. Factory chain length will clamp 8"
IPS (200mm) pipe.
With reasonable care and maintenance, these machines will
give years of satisfactory service.
TX01037-7-18-96
Before operating this machine, please read this manual
thoroughly, and keep a copy with the machine for future
reference. This manual is to be considered part of your machine.
PH0
1559-6-1
3-99
McElroy University
For more than 30 years, McElroy has been the only pipe
fusion machine manufacturer to continuously offer advanced
training. Course offerings are meant to enhance your efficiency,
productivity and safety in the proper use of McElroy machines.
McElroy University classes are structured so that the skills
learned and the machines used in each class closely match
the machines found on pipelining jobsites. We offer training at
our facility or yours. Our uniquely qualified McElroy University
course instructors offer years of industry experience.
Tuition for each course includes lunches, course materials and
a certificate of completion. Online registration, as well as
up-to-date course offerings and dates, is available at
www.
mcelroy.com/university
This manual is intended as a guide only and does not take the
place of proper training by qualified instructors. The information
in this manual is not all inclusive and can not encompass all
possible situations that can be encountered during various
operations.
MU2-03-1
3-1
4
TX04659-03-24-14