McDATA ULTRANET EDGE 3000 Скачать руководство пользователя страница 2

Страница: 2 / 428

UltraNet™ Edge Storage Router 3000 User Guide

Record of Revisions and Updates

Printed December 2006

First Edition

No part of this publication may be reproduced or distributed in any form or by any means, or stored in a

database or retrieval system, without the prior written consent of McDATA Corporation.

The information contained in this document is subject to change without notice. McDATA Corporation

assumes no responsibility for any errors that may appear.

All computer software programs, including but not limited to microcode, described in this document are

furnished under a license, and may be used or copied only in accordance with the terms of such license.

McDATA either owns or has the right to license the computer software programs described in this document.

McDATA Corporation retains all rights, title and interest in the computer software programs.

McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating

to this document, the products or the computer software programs described herein. McDATA

CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR

A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,

special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or

profits, arising out of this document, even if advised of the possibility of such damages.

McDATA Eclipse, Fabricenter, HotCAT, Intrepid, Multi-Capable Storage Network Solutions, Networking the

World's Business Data, nScale, nView, OPENready, SANavigator, SANpilot, SANtegrity, SANvergence,

SecureConnect and Sphereon are trademarks or registered trademarks of McDATA Corporation. OEM and

Reseller logos are the property of such parties and are reprinted with limited use permission. All other

trademarks are the property of their respective companies. All specifications subject to change.

Revision

Date

Description

620-000248-000

8/2005

Initial release of this manual under the
McDATA label.

620-000248-313

11/2005

Edge Storage Router 3000 Release 3.1.3

620-000248-010

6/2006

Edge Storage Router 3000 Release
3.1.4,RoHS compliant Gigabit Ethernet.

620-000248-020

7/2006

Edge Storage Router 3000 Release 3.1.5.
RoHS compliant OC-3 ATM.

620-000248-030

12/2006

Edge Storage Router 3000 Release 3.2.
FICON Tape Read, Adaptive Rate Limiting,
RoHS compliant 10/100 Ethernet.

Содержание ULTRANET EDGE 3000













































































































































































































































































































































































































































Результаты поиска

Содержание ULTRANET EDGE 3000

Отзывы:

Похожие инструкции для ULTRANET EDGE 3000

Бренды по названию

Популярные бренды

McDATA ULTRANET EDGE 3000, Руководство пользователя

Результаты поиска

Содержание ULTRANET EDGE 3000

Отзывы:

Похожие инструкции для ULTRANET EDGE 3000

Бренды по названию

Популярные бренды