CartPark Architectural |
Page 7 of 11
9
Lift Roof Frame Assemblies to meet at the peak and Secure
Lift roof frame assemblies up and over each other. Lower roof frame assemblies until both frames aligned at the
peaked as shown in Detail A. Secure roof frame Assemblies at the ridge with 7, ¼-20 x 1-3/4” Long Hex Washer
Head Screws, and 7, ¼-20 Serrated Washer Nuts.
Important:
Careful not to rip foam weatherstrip tape and do not over torque screws.
10
Roof Frame Assembly
Foam
Tape
s
s
s
s
s
s
Secure Roof Frame Assemblies to Toprails.
Secure Roof Frame assembly to both Toprails with four additional Taptite ¼-20 x 1.0” screws coated with wax
per side. Retighten screws noted by the S on both sides.
