McCall
Standard Labor Guidelines To Repair Or Replace Parts On McCall Equipment
Advice and recommendations given by McCall Service Technicians do not constitute or guarantee any special coverage.
• A maximum of 1-hour is allowed to
diagnose a defective component
.
• A maximum of 1-hour is allowed for
retrieval of parts
not in stock.
• A maximum
travel distance
of 100 miles round trip and 2-hours will be reimbursed.
• Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight damage, and/or
correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a
Service Work
Authorization
from McCall. You must submit the number with the service claim.
Labor Of 1-Hour Is Allowed To Replace:
• Thermostat
• Contactor/Relay
• Door Jamb Switch
• Evaporator/Condenser Fan Motor and Blade
• Solenoid Coil
• Circulating Fan Motor and Blade
• Hi-limit/Thermal Protector Switch
• Microprocessor Control
• Fan Delay/Defrost Termination Switch
• Transformer
• Compressor Start Components and Overload Protector
• Door Hinges, Locks, and Gaskets
• Defrost Timer
• Condensate Element
• Thermometer
Labor Of 2 Hours To Replace:
• Drawer Tracks/Cartridges
• Defrost Element
• Pressure Control
• Heating Element
• Solenoid Valve
• Locate/Repair Leak
Labor Of 3 Hours To Replace:
• EPR or CPR Valve
• Condenser or Evaporator Coil
• Expansion Valve
Labor Of 4 Hours To Replace:
• Compressor
This includes recovery of refrigerant and leak check.
$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings,
solder, brazing rod, nitrogen, or similar fees.)
Refrigerants:
• R404A A maximum of $15.00/lb. or $1.00/oz. will be reimbursed.
