McALLISTER Mig 17, Руководство пользователя

Страница: 9 / 13

Glue the plywood catapult peg into the slot in the fuselage.
FINISHING
Using fine sandpaper, smooth all of the surfaces. You can fly the model as it is without further finishing
but avoid wet conditions. One thin coat of Zinsser Shellac (Traditional Finish & Sealer) will harden the
balsa wood and provide a degree of water resistance. Sand very lightly after coating.
The finished glider shown here was first sealed with Shellac and then given a light coat of Krylon silver
spray paint.
The paper cockpit details should be carefully cut out with small scissors or a sharp new blade. Look at the
photo for location. Stay away from the curved edge a little. The edges can be colored black with a
Sharpie later.