McALLISTER Mig 17, Руководство пользователя

Страница: 5 / 13

Slide the wing into the slot in the fuselage. Check that the wing join is directly down the center line of the
fuselage. Adjust the wing slot with sandpaper to get a good but not too tight fit.
Look from the front of the fuselage; the wings should be positioned so that they are at the same angle on
each side of the fuselage.
To check this, you can set the fuselage and wing inverted on a flat surface. Use a right angle to set the
fuselage vertical. Put a scrap of 1/8” (3mm) balsa under each wing tip. When satisfied with the alignment,
run thin superglue along each side of the joint to glue the wing in place. Glue on the top surface when the
glue is set.