Installation and use
SOLID CONTROL MCK 2000
9
3.1 How to install the Computer
To assemble the Monitor operate as follows:
Within the driver’s cabin, on a flat surface, make 2 holes (D. 9 mm)
correspondent to the ones on the clamping bracket
(A)
and firmly fix the bracket
to the frame by means of two screws (not supplied);
fix the Monitor on the fixing bracket by means of the proper handles
(B)
.
Note:
we recommend installing the Monitor in front of the operator to make it
easier to use during the working cycle.
Picture 3. Assembling the Monitor.
A
B
B
